Mantis "E" System User Manual download pdf (Page 10)

1. Clean.

2. Lubricate for rust prevention.

3. Store indoor.

Storage

1. With both hands on the handles, push lockout trigger

button with your thumb first, and then squeeze trigger.

Start edging when blade rotates at full RPM, by

lowering the blade gently into the ground.

2. Thoroughly inspect the surface were the equipment is to be

used and remove all stones, sticks, wires, bones and other

foreign objects.

3. Before edging, water the area to soften the ground to make

edging easier.

4. Plan to edge regularly to make it easier to keep a neat edge

and to avoid making more then one pass.

5. Don’t force the blade. Only move forward as the blade will

allow.

6. Do not use Edger Attachment to make a new groove into

hard ground!

7. You can use the V-notch to indicate postion of the

blade tip.

Trimming Techniques

Lockout Trigger Button

Trigger

V-notch to indicate

the position of the

blade tip

V-notch in the

blade guard

Blade

1 2 ... 5 6 7 8 9 10 11 12 13 14

No comments

Mantis "E" System User Manual Page 10