Mantis 7262 Owner's Manual download pdf (Page 4)

DON’T FUEL, REFUEL, OR

CHECK FUEL WHILE

SMOKING, OR NEAR AN

OPEN FLAME OR OTHER

IGNITION SOURCE.

INCORRECT ASSEMBLY.CAUTION: WHEN

ASSEMBLING THE HANDLES,

MAKE SURE FUEL TANK FACES

AWAY FROM OPERATOR. THIS

IS THE REAR OF THE TILLER,

REFER TO ASSEMBLY

INSTRUCTION ON PAGE 7.

CUTTING HAZARD; KEEP

FEET AND HANDS AWAY

FROM ROTATING TINES.

WEAR EAR AND EYE

PROTECTION.

READ OWNER’S MANUAL

BEFORE USING TILLER, OR

PERFORMING ANY REPAIR

OR MAINTENANCE. KEEP

OWNERS MANUAL IN A

SAFE PLACE.

DO NOT CARRY THE TILLER

IN THIS POSITION.

WARNING • DANGER

IF THE TILLER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED,

THE USERS RISK SERIOUS INJURY TO THEMSELVES AND OTHERS.

READ AND UNDERSTAND THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS TILLER.

! !

An important part of the safety system incorporated in this tiller are the

warning and information decals found on various parts of the tiller. These

decals must be replaced in time due to abrasion, etc. It is your responsibility to

replace these decals when they become hard to read. The location and part

numbers (P/N) of these decals are illustrated below.

III. Safety Decal Information

P/N 400620

P/N 400609

IV. Warnings - Do’s

Read and understand the

Operator/Parts manual. Pay particular

attention to all sections regarding safety.

1. Always keep a firm grip on both

handles while the tines are moving

and/or the engine is running. BE

AWARE!! The tines may coast after

throttle trigger is released. Make sure

tines have come to a complete stop

and engine is off before letting go

of the tiller.

2. Always maintain a firm footing and

good balance. Do not overreach while

operating the tiller. Before you start to

use the tiller, check the work area for

obstacles that might cause you to lose

your footing, balance or control of

the machine.

3. Thoroughly inspect the area where

equipment is to be used and remove

all objects, which can be thrown by

the machine.

4. Always keep area clear of children, pets,

and bystanders.

5. Always stay alert. Watch what you are

doing and use common sense. Do not

operate unit when fatigued.

6. Always dress properly. Do not wear

loose clothing or jewelry, they might get

caught in moving parts. Use sturdy

gloves. Gloves reduce the transmission

of vibration to your hands. Prolonged

exposure to vibration can cause

numbness and other ailments.

7. While working, always wear

substantial footwear and long trousers.

Do not operate the equipment when

barefoot or wearing open sandals.

8. Always wear ear and eye protection.

Eye protection must meet ANSI Z 87.1.

To avoid hearing damage, we

recommend hearing protection be worn

whenever using the equipment.

9. To reduce fire hazard, keep the engine,

and petrol/gas storage area free of

vegetative material and excessive grease.

10. Start the engine carefully, according to

the manufacturer’s instructions and

with feet well away from tool(s).

11. Keep all nuts, bolts and screws tight to

be sure the equipment is in safe

working condition.

12. Use extreme caution when reversing

or pulling the machine towards you.

13. Work only in daylight or good

artificial light.

14. Always be sure of your footing on

slopes.

15. Exercise extreme caution when

changing direction on slopes.

16. Always keep a safe distance between

two or more people when working

together.

17. Always inspect your unit before each

use and ensure that all handles, guards

and fasteners are secure, operating, and

in place.

18. Always maintain and examine your

Tiller with care. Follow maintenance

instructions given in manual.

19. Always store tiller in a sheltered area

(a dry place), not accessible to

children. The tiller as well as fuel

should not be stored in a house

Classic 4-Cycle Tiller Operator/Parts Manual

1 2 3 4 5 6 7 8 9 ... 20 21

Comments to this Manuals

No comments

Mantis 7262 Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Mini tillers Mantis 7262