Mantis "E" System User Manual

Browse online or download User Manual for Power tools Mantis "E" System. Mantis "E" System User's Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - Edger “E” System

© 2006 Mantis, Div. of Schiller-Pfeiffer Inc. All Rights Reserved.Edger “E” SystemOwners Manual and Safety Instructions

Page 2

91. Clean.2. Lubricate for rust prevention.3. Store indoor.Storage1. With both hands on the handles, push lockout triggerbutton with your thumb first,

Page 3 - Safety and Warnings

10Service Maintenance GuideArea Maintenance procedure FrequencySpline male/female connection of theinner drive shaftInspect/Lubricate1. Remove the sid

Page 4 - General Safety Rules

1112346578201112242591013141516232218192126312928303227423941403433353637384443495848474651545556575352564550626061596317Edger “E” System Exploded Vie

Page 5 - IMPORTANT NOTE:

KEY # DESCRIPTION PART # QTY1 GEAR CASE ASSEMBLY 331137 12 GEAR CASE 331138 13 O-RING 331139 14 BEARING 6201Z 331140 15 SEAL 331141 16 RING RETAINING

Page 6

Specifications, descriptions, and illustrative material in this literature are as accurate as known at the time of publication, but are subject to cha

Page 7 - Assembling the Edge Trimmer

1Table of ContentsImportant InformationA. IntroductionThis attachment is fitted with a blade, intended to be used toedge flower beds, sidewalks, drive

Page 8 - Power Head assembly

2Safety and WarningsA. Safety DecalsPlease pay particular attention to the warning and informationdecals found on various parts of this Edger Attachme

Page 9

3General Safety Rules1. Never edge while people, especially children or pets arenearby.2. Before using, always visually inspect to see that the blade,

Page 10 - Trimming Techniques

Length (feet) 1 to 25 26 to 50 51 to 100 101 to 150Cord gauge (AWG) 18 16 14 124b. Based on the total length of cord that you are going to use, check

Page 11 -  Light #10 oil

5WARNING – DANGERIMPROPER ASSEMBLY OF THIS EQUIPMENTCAN RESULT IN SERIOUS INJURY. MAKE SURETO FOLLOW ALL INSTRUCTIONS CAREFULLY.IF YOU HAVE ANY

Page 12

6Tools: 9/16" wrench, pin supplied with the unit orscrewdriver1. Remove the following parts from the Edge TrimmerAssembly: blade mounting bolt #1

Page 13 - Edger “E” System Parts List

7Check the balance of the assembled unit. The handles andshoulder harness have been assembled at the factory and setaccording to the average sized per

Page 14 - (215) 355-9700

8Tools: 9/16" wrench, pin or screwdriver1. Lock the gear shaft by inserting the pin or screwdriverthrough the aligned keyholes in the gear case c

Comments to this Manuals

No comments